-$21.00

BILLFET 720P Video surveillance Wireless IP Camera with battery Wifi Camera webcamera Remote PTZ Security Camera Nanny Moniter

SKU: 202682
Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$71.99 $50.99

50 in stock

Compare

Description

BILLFET IP Camera Portable Baba Ecectronica com Camera Wi-fi Camera bebe Baby Camera

*1/4 CMOS

*Private case

*Mega pixels with IR-cut, no color-cast, 720P

*H.264 triple compression

*PTZ control Horizontal angle 270°; Vertical angle 90° , 5X digital zoom

*32GB TF card slot

*Offer free iPhone, Android and iPhone push software

*Support plug and play function

*Support NAS function

*Privacy mask

*Dynamic alarm function

*Music

*Sound detection

*Built-in lithium battery

*Dynamic alarm function

Specification

Image

Image sensor 1/4 Color CMOS

Lens 3.6MM

Infrared LEDS 10PCS

Image 1 Mega pixels, 720P

Night vision 12M

AWS/AGC/AES/ exposure Auto

Mini. Illumination 0.1Lux

Audio

Audio Two-way audio

Input Built-in speaker

Output Built-in Microphone

Video

Image Format PAL/NTSC

Image Compression H.264 triple compression

Image Frame Rate 25fps

Resolution 1280×720 640×480(VGA), 320×240(QVGA)

Remote transmission Support NAS P2P App

Privacy mask Protect privacy areas

PTZ

Pan/tilt Horizontal 270°; Vertical 90°

ZOOM 5X digital ZOOM

Network

Wi-Fi IEEE 802.11b/g/n

Network Interface RJ-45 (10BASE-T/100BASE-TX)

Supported Protocol TCP/UDP/IP/ARP/ICMP/DHCP/DNS/HTTP/FTP/SMTP/NTP/PPPOE/UPNP/DDNS/RTSP

Alarm

Motion Detection Send image pictures to Email/FTP/App within the Provided time

Voice Detection Send image pictures to Email/FTP/App within the Provided time

PIR Support (Special camera )

P2P

iOS iOS 6.1+, Live Video, Live Audio, Alarm Push, Live Record etc.

Android Android 2.3+, Live Video, Live Audio, Alarm Push, Live Record etc.

PC WinXP +, Live Video, Live Audio, Alarm , Live Record etc.

General

SD Card 32GB TF card slot

Friendly use Plug and Play function

User Authentication Authentication: user/password; administrator/general user

Web browser IE 6.0 or above version, Mozilla Firefox, Safari, Opera, Chrome ,etc

Mobile view Support Symbian, Android, iPhone and other smart mobile phone, iPhone push

Power DC 5V 2.0A

Power consumption 6W/4W (Infrared on/off)

Operating temperature -10 to+55 °C

Storage temperature -20 to+60 °C

Operating humidity 20- 80%RH

Storage humidity 20- 95%RH

Dimensions 200mm x120mm x180mm(Lx W x H)

Net Weight 600g(Main body)

For Mobile Device

1,Download BILLFET VISION from App Store for IOS device or from Google’s Play Store for Android device. For easy installation , Please scanning the QR code to download and install BILLFET VISION . If your android device could not access Google’s Play Store, please google BILLFET VISION directly.

2,Tap on+ to add your new camera . Click Add new online cameras and enter camera’s UID and password to add camera.

3, There are 2 ways to enter the camera’s UID quickly, by scanning the QR code on the camera and search the cameras in LAN. Click Scan to initiate the scan and click Search to search the cameras in LAN.

4, Enter the camera’s name and P2P password. By default the P2P password is 8888. After click OK, the camera will be added successfully,

5, Select the camera you have just added to start viewing live video and tap on the black area to lauch the control panel.

Set up Camera

1, Press the camera item in the camera list for about 3 seconds to start configuring your camera.

2, The camera will start scanning for Wi-Fi connections. Select your Wi-Fi network ID(SSID). Enter the password for the Wi-Fi connection.

3, When the Wi-Fi is successfully configured, you can now disconnect the network cable from your camera amd start using your camera as a wireless device.

*Notice: Please wait for at least 30s (maximum to 1 minute )for Wi-Fi Mode to be completely functional.

4, After set up Wi-Fi ,we could set up SD card recording mode.

5, Set up Alarm config tp enable motion detection alarm.

Set up Wi-Fi Without Network Cable

1, If no network cable or Wi-Fi connected, the camera will be in Wi-Fi Setting Mode for 90 seconds after booting. When the camera in Wi-Fi Setting Mode, the connection indicator will flicker and frequency will be 3Hz.

2, Once the camera in Wi-f-Fi Setting Mode ,we could set up Wi-Fi connection without network cable connected to the camera. Tap on + to add your new camera. Click set up camera WIFI Connection.

3,Enter the camera ‘s UID by scan QR code or typing in manually. Enter Wi-Fi SSID and password, and click Start Configuring WIFI.

4, Wait for several seconds to finish Wi-Fi setting. When the Wi-Fi connection set up, click Add New Camera to add the camera.

*Notice:If the App always shows failure, Please try set up Wi-Fi by connecting a network cable with the camera and router.

View in PC Windows Web Browsers

1, Run IP Camera Finder in CD’s Windows folder, Click Find and double click the camera item listed in the camera list.

2, The default web browser will try to login the camera automatically. The default username is admin. There is no password by default, so leave the password field blank.

3, Download web browser plug-in and install it to support playing live video in Windows web browsers. Please ignore system warning when downloading or installing the plug-in.

4, After installing the plug-in ,choose Browser plug-ins mode to get live video.

Frequently Asked Questions

1,Why does my computer or security software say the software is dangerous and it is a virus?

The software will detect device in your network , and it seems like a virus. Please ignore the warning and continue.

2, Why can not the search tool detect the camera?

Please make sure the newwork cable is connected and turn off firewall and security software on your computer . And make sure the camera is connected to the router but not the computer.

3, Why does the camera always ask for user name and password, or it says Incorrect User?

The camera’s default user name is admin, and the default password is N/A ,that means you just need leave it blank. If you forget your user name or password, you can reset the camera to factory setting to get the default user name and password.

4, Why can get live video in web browser?

Please download and install plug-in before get live video. If still no live video, check whether the plug-in enabled in your web browser?

5, How can I reset the camera to factory setting?

Please press the reset button under on the camera for about 3-5 seconds until the camera ‘s indicator turned off. Please make sure the power supply is connected when you are doing it.

6, Why can not the camera record video?

Please make sure are running the web browser by administrator. Right click the web brower and select Run Adminstrator to run as adminstrator. For Android App, Please insert a TF card into the camera before recording.

7, Why is the image blurry?

Remove the protective film on the lens and rotate the lens of the camera to get a clear image.

Welcome to our store!

Have a good shopping time!

Review (1)

5.0
1
0
0
0
0

Add a review

*

  1. Rated 5 out of 5

    S***v

    Все пришло… Все ОК.