6S 10A 25.2V lipo lithium Polymer BMS/PCM/PCB battery protection circuit board for 6 Packs 18650 Li-ion Battery Cell with Balance with Temperature switch
The BMS is used for li-ion battery with balancing function Note: This BMS is WITH 65 degree temperature controller. Features: 1) high-accuracy voltage detection circuit; 2) terminal of the charger using high voltage device; 3) Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit); 4) MOS transistor can control the battery charge and discharge; 5) low standby current consumption.
over charge: 4.325V
over discharge: 2.5V
charge voltage: 4.2 V * 6 = 25.2V
continuous work current: 10A
over current: 50A
balance voltage: 4.2V
balance current: 42mA
charge: B6(P+)and P-:
discharge: B6(P+)and P-:
6S Li-ion18650,LiCoO2,LiMn2O4,Li(NiCoMn)O2 rechargeable batteries
6S Lipo rechargeable batteries
1. Please pay attention to the use condition of input and output voltage and load current , make the protective plate within the power consumption of no more than specification allows power consumption;
2. Connect the battery will happen cannot discharge status, in this case, connect the charge can be restored to normal working state; 3.If a set of batteries with over-discharge and over-charge cells, the bms cannot be charge and discharge.